Power cord cable harness tester WPM-8683, Wiring Harness Test Machine, Wiring Harness Connection Testing Machine, Power Cord Plug Cable Tester
1.Meet UL, VDE, CSA, SAA, T-MARK, KS. IRAM, CCC, and other countries’ standards.
2. used to test single–ends, double–ends, three-ends power supply cords.
3. Auto and continuous test in COND, Insulation Resistance, Leakage Current, Line-to-line Hi-pot(inside HV), Leaking copper(outside HV), relative length.
5. Auto test the fine and detective goods, tested qualified ones can be ejected by ejector pin and marked, automatic cutting defective products, and alarmed with voice prompt and light,
6. Provide with RS 232 interfaces, can communicate with PC, easy to upgrade,
7. Provide personalized customization according to different requirements.
1 Polarity: Break over, short circuit, open circuit, dislocation
2 Leakage current Setting Range: 0.5, 1.0, 2.0, 3.0, 5.0, 10mA
3Internal High-Voltage Output:0---5KV(500VA) Adjustable
4 External High-Voltage Output: 0---5KV(500VA) Adjustable
5 Operating Voltage:220VAC 12A 5060 HZ
6 High-voltage range: 0-5KV
7 Resolution: 0.5 level
8 Output Voltage: DC500V
9 Insulation resistance Range : 2, 7, 20, 50, 100, 200 MΩ
10 Resolution: 0.5 level
11 Voltage withstand time
12 Timing Range: 0.1-99.9/S
13 Min time for item measuring: 0.3S
14 Wire sensitivity : >10pF
15 Barometric Pressure : <4 Kg f / cm2
OK Product: Automatic printing and ejection, counting, and indicator ON
NG Product: Automatic modulus locking, counting, indicator ON, and buzzer ringing
16 Size and Weight: 730*530*500 mm
17 Weight:: 80 KG
Other Functions: Automatic cutting defective products and alarmed with voice prompt and light
safeguard: electric leakage, Short circuit, overheating